JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe

JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe

Standard: JIS G 3456

JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe are low-cost Low Carbon Steel Pipes with max 025 % carbon content with combination of 030-090 % manganese easy to form and shape .

E-mail: [email protected]

Chat OnlineLeave a message

JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe are also known as mild steel pipes and tubes.JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe are low-cost Low Carbon Steel Pipes with max 025 % carbon content with combination of 030-090 % manganese easy to form and shape .These pipes are manufactured as per JIS Specification and commercially referred as cs pipes or ms pipes.Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.
JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe Chemical composition (% ):


Steel grade

Chemical composition (% )

C max

Si

Mn

P max

S max

STPT 370

0.25

0.10-0.35

0.30-0.90

0.035

0.035

JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe mechanical properties:


Steel grade

Yield Strength 
Mpa(min)

Tensile  Strength
Mpa(min)

STPT 370

216

373

JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe supplied scope/ specification/size is:
OD10.3mm--965.2mm, wall thickness 1.0mm--120mm,Annual capacity is500 thousand tons.
Length: 5-12m
JIS G3456 STPT 370  seamless steel pipe application is widely,JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe is a kind of economical section steel. It has a hollow section and it is used as a large number of pipes conveying fluid, such as the transmission oil, natural gas, gas, water and some solid materials of pipeline. And it is widely used in the manufacture of structural parts and mechanical parts, such as drill pipe, automobile transmission shaft, self frame as well as the construction of the steel scaffolding.
Mechanical properties of JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe can be varied greatly by heat treating. Through a controlled cycle of heating and cooling, certain desired properties are obtained by producing predictable changes in the microstructure of the steel.BBN steel pipe representative will be happy to work with you to develop the information that is required.
BBN steel has 5 production lines and workshop covers an area of 800,000 square meters, owns more than 4000 employees, including 520 senior professionals and technicians,with an annual output of 600,000 tons of various kinds of steel pipe.More about JIS G3456 STPT 370 Fluid Pipe/Fluid steel pipe/seamless steel pipe,contact us at any time.

Please feel free to give your inquiry in the form below.we will reply you quickly. Online Chat