ASME SA210 grade C boiler steel tube SA210C seamless pipe belongs to medium-carbon steel, and it serves for boilers and superheaters. SA210C is short for SA210 grade C, whose equivalent material is ASTM A210 grade C / A210C. The hardness of ASME SA210 grade C boiler steel tube SA210C seamless pipe shall not exceed 89 HRB or 179 HB.

Medium-carbon ASME SA210 grade C boiler steel tube SA210C seamless pipe size:
1)The outside diameter of SA210C seamless pipe is within range from 1/2 in. to 5 in. [12.7 to 127 mm].
2)The min. wall thickness of SA210C seamless pipe is within range from 0.035 to 0.500 in. [0.9 to 12.7 mm].
3)ASME SA210 grade C boiler steel tube SA210C seamless pipe with other dimensions can also be furnished, provided it complies with all other requirements of the ASME SA210/SA210 specification.

Medium-carbon ASME SA210 grade C boiler steel tube SA210C seamless pipe chemical composition:

For each reduction of 0.01 % below the specified carbon maximum of Medium-carbon ASME SA210 grade C boiler steel tube SA210C seamless pipe, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.35 %。

Medium-carbon ASME SA210 grade C boiler steel tube SA210C seamless pipe mechanical property:

The mechanical property requirements do not apply to ASME SA210 grade C boiler steel tube SA210C seamless pipe smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.

Medium-carbon ASME SA210 grade C boiler steel tube SA210C seamless pipe shall be either hot-finished or cold-finished, as specified. Hot finished SA210 grade C boiler steel tube needs not be heat treated. Cold finished SA210 grade C boiler steel tube shall be given a subcritical anneal, a full anneal, or a normalizing heat treatment after the final cold finishing process.