EN 10297 30CrMo4 seamless pipe and tube

Standard: EN10297

EN 10297 30CrMo4 seamless pipe and tube is a special alloy steel pipe for mechanical and general engineering purposes. This kind of pipe is delivered in quenched and tempered condition.

E-mail: [email protected]

Chat Online Leave a message

EN 10297 30CrMo4 seamless pipe and tube is a special alloy steel pipe for mechanical and general engineering purposes. This kind of pipe is delivered in quenched and tempered condition.

EN10297: E355, C45E 25CrMo4, 30CrMo4,34CrMo4, 42CrMo4

EN 10297 30CrMo4 seamless pipe composition(%)

Grade	C	Si	Mn	P	S	Mo	Cr
30CrMo4	0.27-0.34	≤ 0.35	0.35-0.60	≤0.035	≤0.035	0.15-0.30	0.80-1.15

EN 10297 30CrMo4 steel pipe mechanical properties

Grade	Yield strength[MPa] in different thick, mm				Tensile strength[MPa] in different thick, mm				Elongation [%,min]
Grade	≤8	8＜T≤20	20＜T≤50	50＜T≤80	T≤8	8＜T≤20	20＜T≤50	50＜T≤80	T≤8
30CrMo4	750	630	520	480	950	850	750	700	12

EN 10297 30CrMo4 seamless pipe will be supplied in 5-7 metre random lengths with butt-weld ends and varnished to avoid oxidation of the steel when in storage. All pipes are fully certified and traceable with heat numbers hard stamped onto each random length. BBN steel can supply cut lengths service, pipe testing, long pieces and even bore 30CrMo4 seamless pipe to satisfy your urgent demand.

[Back]

Pre: EN 10297 25CrMo4 seamless pipe and tube

Next: EN 10297 34CrMo4 seamless pipe and tube