EN 10297 42CrMo4 seamless pipe and tube

Standard: EN10297

EN 10297 42CrMo4 seamless pipe and tube is a special alloy steel pipe for mechanical and general engineering purposes. This kind of pipe is delivered in quenched and tempered condition.
EN10297: E355, C45E 25CrMo4, 30CrMo4,34CrMo4, 42CrMo4

E-mail: [email protected]

Chat Online Leave a message

EN 10297 42CrMo4 seamless pipe and tube is a special alloy steel pipe for mechanical and general engineering purposes. This kind of pipe is delivered in quenched and tempered condition.

EN10297: E355, C45E 25CrMo4, 30CrMo4,34CrMo4, 42CrMo4

EN 10297 42CrMo4 seamless pipe composition(%)

Grade	C	Si	Mn	P	S	Mo	Cr
42CrMo4	0.38-0.45	≤ 0.40	0.60-0.90	≤0.035	≤0.035	0.15-0.30	0.90-1.20

EN 10297 42CrMo4 steel pipe mechanical properties

Grade	Yield strength[MPa] in different thick, mm				Tensile strength[MPa] in different thick, mm				Elongation [%,min]
Grade	≤8	8＜T≤20	20＜T≤50	50＜T≤80	T≤8	8＜T≤20	20＜T≤50	50＜T≤80	T≤8
42CrMo4	900	750	650	550	1100	1000	900	800	10

EN 10297 42CrMo4 seamless pipe will be supplied in 5-7 metre random lengths with butt-weld ends and varnished to avoid oxidation of the steel when in storage. All pipes are fully certified and traceable with heat numbers hard stamped onto each random length. BBN steel can supply cut lengths service, pipe testing, long pieces and even bore 42CrMo4 seamless pipe to satisfy your urgent demand.

[Back]

Pre: EN 10297 34CrMo4 seamless pipe and tube

Next: EN10297 E355 Seamless Steel Pipe Features