GB 8162 seamless pipe Q345C structural steel tube
Standard: GB/T 8162
GB 8162 seamless pipe Q345C structural steel tube is low alloy high strength steel pipe for structural purposes. Q345C steel is equivalent to EN S355J0. Compared to Q345B steel, the phosphorus and sulfur impurities in Q345C steel is less, which should not exceed 0.030%. That improves its impact toughness. The impact test of GB 8162 Q345C structural steel tube is done at 0℃, and the impact energy is 34J and above.
E-mail: [email protected]
GB 8162 seamless pipe Q345C structural steel tube is low alloy high strength steel pipe for structural purposes. Q345C steel is equivalent to EN S355J0. Compared to Q345B steel, the phosphorus and sulfur impurities in Q345C steel is less, which should not exceed 0.030%. That improves its impact toughness. The impact test of GB 8162 Q345C structural steel tube is done at 0℃, and the impact energy is 34J and above.
GB 8162 seamless pipe Q345C structural steel tube chemical composition:
GB 8162 | C | Mn | Si | P | S | V | Nb | Ti | Cr | Ni | Cu | N | Mo | B | Al |
Q345C | ≤0.20 | 1.7 | ≤0.50 | ≤0.030 | ≤0.030 | ≤0.15 | ≤0.07 | ≤0.20 | ≤0.30 | ≤0.50 | ≤0.20 | ≤0.012 | ≤0.10 | - | ≥0.015 |
GB 8162 seamless pipe Q345C structural steel tube mechanical properties:
GB 8162 | Yield Strength Min | Tensile Strength | Elongation | ||
Q345C | WT≤16 | WT>16-30 | WT>30 | ||
345 Mpa | 325 Mpa | 295 Mpa | 470-630 Mpa | 20% |
Wall thickness tolerance of GB 8162 seamless pipe Q345C structural steel tube:
The wall thickness tolerance of GB 8162 seamless pipe Q345C structural steel tube can be different from below specification after negotiation between the supplier and buyer.
Hot rolled | Outside Diameter, mm | Tolerance |
OD≤102 | ±12.5%WT or ±0.40mm, choose the larger | |
OD>102, WT/OD≤0.05 | ±15%WT or ±0.40mm, choose the larger | |
OD>102, 0.05<WT/OD≤0.10 | ±12.5%WT or ±0.40mm, choose the larger | |
OD>102, WT/OD>0.10 | +12.5%WT, -10%WT | |
Hot expanded | ±15%WT |
The diameter tolerance of hot-finished GB 8162 seamless pipe Q345C structural steel tube:
±1%OD or ±0.50mm, choose the larger.
For GB 8162 seamless pipe Q345C structural steel tube, if the nominal outer diameter > 22mm-600mm and ratio of wall thickness to outer diameter no more than 10%, it shall do flattening test.
The technical requirements, test methods, inspection rules, packaging, marks and quality certificates and so on details of GB 8162 seamless pipe Q345C structural steel tube need to comply with GB 8162 specification.
-
DIN17175 10CrMo910 steel pipe
-
DIN17175 15Mo3 steel pipe featur
-
What is DIN17175 St45.8 steel pi
-
DIN17175 St35.8 steel pipe chara
-
What is API 5L PSL2 X70MO pipeli
-
API 5L PSL2 X65M pipeline steel
-
API 5L PSL2 X60MO pipeline steel
-
API 5L PSL2 X56MO pipeline pipe
-
API 5L PSL2 X52MO pipeline steel
-
API 5L PSL2 X46M concepts and fe
PRODUCT
Contact
- Henan BEBON Iron&Steel co., ltd.
- 0086-371-86151827
- 0086-371-86011881
- [email protected]
- Online Consultation
-
1358 tons 35CrMo pipes for Tanza
We exported 1358 tons 35CrMo seamless pipe to Tanzania in Ap ...
-
1200 tons SA204Gr.B Seamless pip
NNPC has long-term cooperation with SINOPEC---China Petroleu ...
-
A106M GRB PIPE FOR BIR SEBA Fiel
The Pipelines and Products Marketing Company (PPMC) by oil m ...