High strength low alloy GB 8162 Q345B structural steel seamless pipe
Standard: GB/T 8162
GB 8162 Q345B structural steel seamless pipe is high strength low alloy steel with wide application. The Q345B steel pipe needs to do impact test at +20℃ temperature, and the impact energy should be 34J and above. The diameter tolerance for hot-finished GB 8162 Q345B structural steel seamless pipe is ±1%OD or ±0.50mm, depending on the the larger.
E-mail: [email protected]
GB 8162 Q345B structural steel seamless pipe is high strength low alloy steel with wide application. The Q345B steel pipe needs to do impact test at +20℃ temperature, and the impact energy should be 34J and above. The diameter tolerance for hot-finished GB 8162 Q345B structural steel seamless pipe is ±1%OD or ±0.50mm, depending on the the larger.
High strength low alloy GB 8162 Q345B structural steel seamless pipe chemical composition:
GB 8162 | C | Mn | Si | P | S | V | Nb | Ti | Cr | Ni | Cu | N | Mo | B | Al |
Q345B | ≤0.20 | 1.7 | ≤0.50 | ≤0.035 | ≤0.035 | - | - | - | ≤0.30 | ≤0.50 | ≤0.20 | ≤0.012 | ≤0.10 | - | ≥- |
High strength low alloy GB 8162 Q345B structural steel seamless pipe mechanical properties:
GB 8162 | Yield Strength Min | Tensile Strength | Elongation | ||
Q345B | WT≤16 | WT>16-30 | WT>30 | ||
345 Mpa | 325 Mpa | 295 Mpa | 470-630 Mpa | 20% |
Wall thickness tolerance of GB 8162 Q345B structural steel seamless pipe:
GB 8162 Q345B structural steel seamless pipe is always hot-finished. The wall thickness tolerance of GB 8162 Q345B steel pipe can be different from below specification after negotiation between the supplier and buyer.
Hot rolled | Outside Diameter, mm | Tolerance |
OD≤102 | ±12.5%WT or ±0.40mm, choose the larger | |
OD>102, WT/OD≤0.05 | ±15%WT or ±0.40mm, choose the larger | |
OD>102, 0.05<WT/OD≤0.10 | ±12.5%WT or ±0.40mm, choose the larger | |
OD>102, WT/OD>0.10 | +12.5%WT, -10%WT | |
Hot expanded | ±15%WT |
GB 8162 standard has clear stipulation for the ordering content, size, shape, weight, technical requirements, test methods, inspection rules, packaging, marks and quality certificates of Q345B structural steel seamless pipe, the Q345B structural steel pipe manufacture should follow the terms. The flattening test should be conducted for GB 8162 Q345B seamless pipe if the nominal outer diameter > 22mm-600mm and ratio of wall thickness to outer diameter no more than 10%.
-
DIN17175 10CrMo910 steel pipe
-
DIN17175 15Mo3 steel pipe featur
-
What is DIN17175 St45.8 steel pi
-
DIN17175 St35.8 steel pipe chara
-
What is API 5L PSL2 X70MO pipeli
-
API 5L PSL2 X65M pipeline steel
-
API 5L PSL2 X60MO pipeline steel
-
API 5L PSL2 X56MO pipeline pipe
-
API 5L PSL2 X52MO pipeline steel
-
API 5L PSL2 X46M concepts and fe
PRODUCT
Contact
- Henan BEBON Iron&Steel co., ltd.
- 0086-371-86151827
- 0086-371-86011881
- [email protected]
- Online Consultation
-
1358 tons 35CrMo pipes for Tanza
We exported 1358 tons 35CrMo seamless pipe to Tanzania in Ap ...
-
1200 tons SA204Gr.B Seamless pip
NNPC has long-term cooperation with SINOPEC---China Petroleu ...
-
A106M GRB PIPE FOR BIR SEBA Fiel
The Pipelines and Products Marketing Company (PPMC) by oil m ...