API 5CT P110 seamless steel pipe for casing tube

API 5CT P110 seamless steel pipe for casing tube

Standard: API 5L

API 5CT P110 seamless steel pipe is API 5 CT casing, which is mainly used in oil well drilling. According to SY/T 6194-96 standard, we produce API 5CT P110 seamless steel pipe, which can be classified by short pipe and long pipe, and equipped with coupling. According to API Spec 5 CT1988, it was first released.
For oil and gas operators, it is very important to protect production well casings from corrosion. API 5CT P110 seamless steel pipe is mainly used to transport oil and gas.

E-mail: [email protected]

Chat OnlineLeave a message

API 5CT P110 seamless steel pipe is API 5 CT casing, which is mainly used in oil well drilling. According to SY/T 6194-96 standard, we produce API 5CT P110 seamless steel pipe, which can be classified by short pipe and long pipe, and equipped with coupling. According to API Spec 5 CT1988, it was first released.
For oil and gas operators, it is very important to protect production well casings from corrosion. API 5CT P110 seamless steel pipe is mainly used to transport oil and gas.

API 5CT P110 seamless steel pipe chemical composition

Grade

C

Si

Mn

P

S

Mo

Ni

Cr

Cu

API 5CT P110

-

-

-

0.03 e

0.03 e

-

-

-

-

API 5CT P110 seamless steel pipe mechanical properties

Grade

Tensile strength

Yield strength

Elongation %

API 5CT P110

862

758 min

965 max

0.6

API 5CT P110 seamless steel pipe features:
1, The surface of thread of coupling and API 5CT P110 seamless steel pipe should be smooth without any tear, burr or other defects that may have a negative impact on the strength and close connection.
2, API 5CT P110 seamless steel pipe is offered with a free length range from 8m to 13m on basis of the SY/T6194-96 norm. However, it is also available no less than 6m length and its quantity should be no more than 20%.
3, Deformations which mentioned above are not allowed to appear on the outer surface of API 5CT P110 seamless steel pipe coupling.
4, Any deformation such as crease, separation, hairline, crack or scab is not acceptable on both inner and outer surfaces of the product. All these defects should be completely removed, and the removed depth must not exceed 12.5% of nominal wall thickness.

We are the professional steel manufacturer export API 5CT P110 seamless steel pipe, we have our own factory to produce the API 5CT P110 seamless steel pipe. If you want to purchase API 5CT L80-1 seamless tube, please contact us freely. We can supply the API 5CT P110 seamless steel pipe according your requirement.

Please feel free to give your inquiry in the form below.we will reply you quickly. Online Chat