What steel is 40Cr seamless pipe
What steel is 40Cr seamless pipe? 40Cr seamless pipe is a kind of alloy structural steel. It has good comprehensive properties, low-temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40.
The mechanical properties of 40Cr seamless pipe are as follows:
Tensile strength: ≥ 980 Mpa; yield strength: ≥ 785 MPa; elongation after fracture: ≥ 9%; elongation after fracture: ≥ 45%; impact absorption energy: ≥ 47J.
The content of chemical components in 40Cr seamless pipe are as follows:
C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80,Cr: 0.80-1.10.
40Cr seamless pipe is one of the most widely used steel grades. After quenching and tempering, it is used to manufacture medium speed and medium load parts, such as machine tool gear, shaft worm, spline shaft, top sleeve, etc. After quenching and tempering and high frequency induction quenching, 40Cr seamless pipe is used to manufacture parts with high surface hardness and wear resistance, such as gear, shaft, spindle, crankshaft, mandrel, sleeve, pin, connecting rod, screw, nut, intake valve, etc.
-
EN 10210 S355J2H hollow section
-
GB/T 18248 35CrMo seamless pipe
-
GB/T 18248 34CrMo4 seamless pipe
-
GB/T 18248 30CrMo seamless pipe
-
GB/T 8163 Q345E seamless alloy s
-
GB/T 8163 Q345D seamless alloy s
-
GB/T 8163 Q345C seamless alloy s
-
GB/T 8163 Q345B seamless steel p
-
GB/T 8163 20# seamless steel pip
-
EN 10297 42CrMo4 seamless pipe a
Product
Contact
- Henan BEBON Iron&Steel co., ltd.
- 0086-371-86151827
- 0086-371-86011881
- [email protected]
- Online Consultation
-
1358 tons 35CrMo pipes for Tanza
We exported 1358 tons 35CrMo seamless pipe to Tanzania in Ap ...
-
1200 tons SA204Gr.B Seamless pip
NNPC has long-term cooperation with SINOPEC---China Petroleu ...
-
A106M GRB PIPE FOR BIR SEBA Fiel
The Pipelines and Products Marketing Company (PPMC) by oil m ...