EN 10210 S355K2H hollow section seamless pipe

Standard: EN10210

The company can provide various kinds of EN 10210 available shapes include round, square, rectangular, etc. On request from our customers tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test can be made on product samples.

E-mail: [email protected]

Chat Online Leave a message

EN 10210 S355K2H seamless pipe is a non-alloy structural hollow section. The company can provide various kinds of EN 10210 available shapes include round, square, rectangular, etc. On request from our customers tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test can be made on product samples.

EN 10210 pipe grades: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355K2H,S460NLH

S355K2H seamless hollow section composition(%)

Grade	Material no.	C max.	Si max.	Mn max.	P max.	S max.	N max.
S355K2H	1.0512	0.22	0.55	1.60	0.035	0.035	-

EN 10210 S355K2H seamless hollow section mechanical properties

Yield strength[MPa] in different wall thick						Tensile strength[MPa] in different wall thick			Elongation [%,min]
≤16	16＜W≤40	40＜W≤63	63＜W≤80	80＜W≤100	100＜W≤120	≤3	3＜W≤100	100＜W≤120	W≤40
355	345	335	325	315	295	510-680	470-630	450-600	22

EN 10210 S355K2H SHS (Square Hollow Sections) Specification

Sizes : 20*20mm-400*400mm

Wall Thickness : 0.5mm - 25mm

Length : 6000-14000 mm

Type : seamless/ welded / ERW

Dimensional Tolerances : thickness : (All sizes +/- 10%)

Dimension Range : 21.3-914mm

Surface Protection : black (self coloured uncoated), varnish/oil coating, pre-galvanized, hot dip galvanized

EN 10210-1 standard specify technical delivery conditions, tolerances, dimensions and sectional properties of S355K2H hollow section seamless pipe. For any question, welcome to contact us.

[Back]

Pre: EN 10210 S355J0H hollow section seamless pipe

Next: EN 10210 S355J2H hollow section seamless pipe